Sometimes, full blown zone controls are not needed to solve an airflow or temperature related issue in the ducting of a home or other building.
One example might be a bonus room, a basement or a 3 season room that could benefit from some air occasionally but doesn’t necessitate a zone control system with all of the features included with our SmartZone products.
For these applications, we have developed a control board that can connect a thermostat directly to a damper for basic control.
With this Damper Direct Controller, you can simply connect any thermostat, a 24vac transformer & hook up your damper (ANY damper will work as long as it is 24V).
The applications for this product are too may to list but, for us, it is just one additional tool in the toolbox for managing comfort and efficiency of your home or building’s HVAC. Contact ecojay.com or us here at ZoningSupply if you have any questions or ideas.
Control any damper with any thermostat using this interface board from ECOJAY.
Connect any standard thermostat (24VAC) to the input of this board along with a 24VAC transformer, then connect any 24VAC damper to the output (3-wire dampers recommended)
In normal operation (AUTO), the damper will remain closed unless the thermostat make a “call.” Depending on which wires are connected, the damper will open when the thermostat calls for HEAT, COOL or BOTH. Additionally, the ECOJAY Damper Direct Controller Incudes a manual over-ride switch to easily open the damper any time it’s needed.
