- PRODUCTS - SmartZone
- Direct Damper Controller
Direct Damper Controller





Direct Damper Controller
Control any damper with any thermostat using this interface board from ECOJAY.
Connect any standard thermostat (24VAC) to the input of this board along with a 24VAC transformer, then connect any 24VAC damper to the output (3-wire dampers recommended)
In normal operation (AUTO), the damper will remain closed unless the thermostat make a “call.” Depending on which wires are connected, the damper will open when the thermostat calls for HEAT, COOL or BOTH. Additionally, the ECOJAY Damper Direct Controller Incudes a manual over-ride switch to easily open the damper any time it’s needed.
Control any damper with any thermostat using this interface board from ECOJAY.
Connect any standard thermostat (24VAC) to the input of this board along with a 24VAC transformer, then connect any 24VAC damper to the output (3-wire dampers recommended)
In normal operation (AUTO), the damper will remain closed unless the thermostat make a “call.” Depending on which wires are connected, the damper will open when the thermostat calls for HEAT, COOL or BOTH. Additionally, the ECOJAY Damper Direct Controller Incudes a manual over-ride switch to easily open the damper any time it’s needed.
If you have a need to open or close a damper based on room temperature but do not need or want control of the HVAC equipment, this is the product you have been looking for.