15% OFF ALL SmartZone Controllers
- CONTRACTORS INTRODUCTION SALE -
Additional 15% off for a limited* time using COUPON CODE: CONTRACTOR at checkout. This discount is intended to introduce contractors and re-sellers to the SmartZone products.
We are confident that you will love SmartZone... if you don't, return it for a refund.
SmartZone
by ecojay
ECOJAY SmartZone residential & light commercial zoning controllers are easily configurable to satisfy a wide range of application. Simple installation and setup make SmartZone perfect for CHANGE-OUT, RETRO-FIT, NEW-INSTALL and UPGRADES.
$85*
Check out the newest version here:
https://zoningsupply.com/buy/smartzone-2
The 2L is the simplest SmartZone ever but don't mistake simplicity for "basic" or "low-end" this is a feature-packed 2 zone with multi stage control and temp sensor.
$127*
2X is the premium 2 zone panel and adds to all the features of the 2L: LEDs on every terminal, full temperature display & a more granular temperature settings for staging and limit protection.
$169*
This product is out of stock but can be replaced with the newest version SmartZone-4X 3.0
The 4X is the top of the line zone panel with built-in fresh air control, LEDs on every terminal, expandable up to 20 zones, and much more.
*With additional 15% discount for a limited* time. Enter coupon code CONTRACTOR at checkout.
For access to future discounts and special promotions, subscribe to our mailing list.
SmartZone FEATURES:
- COMPATIBLE WITH ALL EQUIPMENT TYPES: Gas, Electric, Heat Pump, Dual Fuel
- Up to 2 Stage Cooling & 3 Stage Heating
- Use any thermostat (24V) including ecobee, nest, Honeywell, RobertShaw, & ALL major brands
- Use any damper (24V) spring open/close, power open/close & all major brands
- LEDs on SmartZone show Thermostat Calls, Equipment Mode & Damper Position
- COMPREHENSIVE DISPLAY: Supply Temp, System Status, HI & LO Limit Temps
- SIMPLE SETUP: Dip switches & Pushbuttons allow setup in SECONDS!
- TEMP SENSOR INCLUDED: 4" Stainless Steel Probe w/ 10 ft wire lead & quick-connect plug
Intuitive wiring and push-button wiring terminals make SmartZone the easiest and fastest board to install.
Brightly-lit LED display shows system mode & status information as well as, temperature readout from included supply sensor. Color-coded LED's on all wiring connectors simplify troubleshooting by showing all inputs and outputs without using a voltmeter. SmartZone maximizes equipment efficiency & protection with exclusive built-in ‘Time & temp’ staging controls. Universal compatibility means smartzone works with all equipment types (Heat Pump, Dual Fuel, Gas, Electric, etc), thermostats & 24V dampers. Time-saving and exclusive features like Fresh-Air, SmartLINK for up to 20 zones & push-in terminals make SmartZone the smart choice.
HVAC zone control ● Independent zone fan control ● no dual-fuel kit required ● control emergency heat from zone 1 thermostat ● optional supply temp sensor ● eco mode allows setback from just one zone ● built-in fresh air control & economizer ● Lock-out 2nd stage when only one zone calling ● adjust staging & cut-out limits to maximize comfort or efficiency ● delay fan for gas heat application ● LEDs show damper status, thermostat calls & equipment mode ● simple setup with dip switches & push buttons ● Easy to read terminals ● screwless wiring ● optional temp sensor for better staging & protection ● expandable up to 20 zones using SmartLINK communication port ● best value
SmartZone can replace many models including:
- Honeywell / TrueZone / Zone-a-Trol
- EWC / UltraZone
- ZoneFirst / Trol-a-Temp
- AprilAire
- RobertShaw
- Zonex / California Economize
- DuroZone / Durodyne
- MANY MORE / Contact us
Easy-to-read display & simple pushbutton setup make SmartZone the most straight-forward zone control system to configure and start using.
MORE Popular SmartZone Products:
HVAC Zone control system up to 8 Zones.
Includes two (2) SmartZone-4X 3.0 boards that can be used together for up to 8 Zone systems. Simple 3-wire SmartLINK connection.
4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18" Available
FEATURES:
Industry-leading quality & highest reliability, Belimo Motor, Full-seal gasket blade, Super-Heavy Duty, Ribs for easy flex duct attachment, One crimped end for easy solid duct attachment, 5 Year replacement warranty.
Now available with or without a motor (Select below)
NOTE: All dampers subject to a 10% restocking fee.
Integrated starting-collar flange & adhesive gasket make install easier than any other damper, industry-leading quality & highest reliability, Belimo Motor, Full-seal gasket blade, Super-Heavy Duty, Ribs for easy flex duct attachment, One crimped end for easy solid duct attachment, 5 Year replacement warranty.
Round gasket-ed blade, weight-arm style pressure relief (Bypass) damper.
NOTE: All dampers subject to a 10% restocking fee.
6" X 6" thru 24" X 24"
SUPER Heavy-Duty
Aluminum rectangular damper w/ Ecojay by Belimo motor
Built to stand up to use and abuse
ATTENTION:
Due to delays receiving raw materials, the shipping time on these custom rectangular dampers has been extended: UP TO 3 or 4 WEEKS
We are very sorry about this delay and will be back to normal shipping times very soon! Please call us if you have any questions or concerns about your order.
DELIVERY TIME: UP TO 3 Weeks
(because they are custom made to order)
RETURNS for rectangular dampers require 20% restocking fee because they are custom made to order... please be sure you order the correct size.
NOTE: The motor will always be mounted on the “HEIGHT” side
INCLUDED:
Zone Controller (SmartZone)
Pro-Grade Round Zone Supply Dampers*
Bypass Damper (Round)
50VA 24VAC Power Transformer
* Select each size when "Adding to Cart"
SmartZone KIT
If you need the whole KIT: Dampers, Bypass, SmartZone with Temp & Transformer. (All you need to add are the thermostats)
ZoningSupply.com has made it easy to order a whole zoning system kit with a few clicks. Order your kit now!
*Limited time discount - currently scheduled to end soon. Additional taxes (TX only) & expedited shipping are not discounted.