1. PICK A ZONE CONTROLLER
This really just depends on the number of zone you have or need. If you have 2 Zones, select the 2L, if more select the 4X.
For more than 4 zones, 4X boards can be connected together with SmartLINK (up to 20 Zones)
SmartZone Guide
SmartZone LITE Guide
2. ADD DAMPERS
The sizes will be determined by the duct going to each of the zones. Some zones may require more than one damper but each zone will have at least one damper.
HVAC Damper Guide
POWER
or SPRING
3. SELECT PRESSURE RELIEF (BYPASS)
Barometric bypass works to relief excess pressure in most zoning applications and is the most cost effective solution. Modulating or "STATIC PRESSURE" Controlled bypass can be used for more accurate and quieter pressure relief.
BAROMETRIC
STATIC PRESSURE CONTROLLED
4. MORE ACCESSORIES
More accessories may be needed to complete the zoning project such as a 24Vac transformer. ECO mode switch helps get the maximum performance from any SmartZone install.
EVEN MORE PRODUCTS
